Using the Main Menu14
2. Click DISPLAY, then click the VIEW tab.
3. Select the viewing mode you would like to configure ( ). Use the numbered
dropdown menus in each viewing window to choose the channel that will appear in each
window.
4. Click Apply.
NOTE
You can also click-and-drag channels during Live View to change the display order.
14.4.6 Configuring Sequence Mode
Sequence mode cycles through connected channels to give you an overview of what is happening
on all cameras. You can customize the order that channels appear in Sequence mode, as well as
configure which viewing modes should be used.
To configure Sequence mode:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400111; r. 1.0/55872/56018; en-US 55
To Next Page
Loading...
Need help?
General