Using the Main Menu14
• Read-only HDD: The system can playback data from this hard drive, but it will not record to it.
To configure hard drive types:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click STORAGE, then click the HDD MANAGER tab.
3. Under Type next to the hard drive you want to configure, select Read/Write or Read only.
4. Click Apply.
14.8.7 Recording Calculator (REC Estimate)
Use the recording calculator to get an estimate of your maximum recording time in days for the in-
stalled hard drive, or how much hard drive space would be required to retain a specific amount of
days.
To obtain a recording estimate:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click STORAGE, then click the REC ESTIMATE tab.
3. Select Recording Days for the total number of days worth of recordings your hard drive can
store, or select Disk Requirement for the total storage needed to record for a specific number
of days.
#LX400111; r. 1.0/55872/56018; en-US 74
To Next Page
Loading...
Need help?
General