Lorex LH156 - Step 2 of 3: Obtain the Dvrs Local IP Address; Step 3 of 3: Connect to the Dvrs Local IP Address; To Connect Using the Dvrs Local IP Address on a PC

120
Appendix F: DDNS Setup (Advanced)
3 Turn the power switch to I to power the DVR back on.
Step 2 of 3: Obtain the DVR’s Local IP Address
1 Press the PTZ/ button on the front panel of the DVR to open the System Information
window. If pr
ompted, enter the system user name (default: admin) and password (default:
000000).
2 Writ
e down the IP Address number of the DVR.
• A local IP looks something like this: 192.168.5.1
18. Note that single digit numbers appear as
three digits. For example, "005" is the same as "5".
Step 3 of 3: Connect to the DVR’s Local IP Address
Follow the steps below to confirm connectivity over a local network on a PC or Mac.
To connect using the DVR’s local IP address on a PC:
1 Insert the software CD that comes included with the system. Open the CD and click DVR
Software>Lorex Client Software - PC. Follow the on-screen instructions to install.
• OR, downl
oad the Client Software for PC from www.lorextechnology.com.
ROUTER
(Not Included)
COMPUTER
(Not Included)
(not required for
local viewing)
INTERNET
Ethernet Cable (included)
8-channel model shown
DVR IP address