77
Using the PC/Mac Client Software
• Record Channel: Select the channels that the system should record during an alarm trigger.
3 Cl
ick Save to apply your settings.
Configuring Hard Drive Recording Mode
To configure the hard drive recording mode:
1 Click the Remote Setting t
ab, and click Device>HDD.
2 In the
Overwrite drop-down menu, select Auto to enable overwrite mode. When overwrite is
enabled, the system deletes the oldest footage (first in, first out) when the hard drive is full.
You can also select a desired amount of days or hours the system should retain data. For
e
xample, if you select 30 days, the hard drive will begin to overwrite itself after 30 days. Note
that your hard drive must be large enough to store video for the selected duration.
3 Cl
ick Save to apply your settings.
Configuring PTZ Parameters
The system is capable of controlling PTZ cameras (not included) that are connected to the
system. Please note that you will need PTZ information from the PTZ camera
manufacturer’s users guide. For details on connecting a PTZ camera to your system, see
“Appendix B: Connecting a PTZ Camera” on page 106.
To Next Page
Loading...
Need help?
General