Using the Main Menu15
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (defaut:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From the Main Menu, click
and then select Network>Connection.
2. Configure the ports as needed and click OK to save changes.
NOTE
Up to 3 devices may connect to the system at the same time.
15.3.4 Configuring DDNS Settings
Lorex DDNS is available as an optional connectivity option. Please see 19 DDNS Setup
(Advanced), page 136 for details.
The primary connectivity option uses FLIR Cloud™ to connect to your system over the
Internet without requiring port forwarding or DDNS registration. For details, see 16 Con-
necting to Your System Over the Internet on PC or Mac, page 72.
To configure DDNS Settings:
1. Visit http://www.lorexddns.net and register for a DDNS account.
2. From the Main Menu, click
and then select Network>DDNS.
3. Check Enable.
4. Under Domain Name, enter the Domain Name/URL Request your received in the
email after registering for DDNS.
5. Under User ID, enter your DDNS User Name.
6. Under Password, enter your DDNS Device password.
#LX400060; r.30328/35049; en-US
54