To Next Page

To Previous Page

Using the Main Menu15

5. Under Channel, select the channel you would like to enable for mirror recording, then

check Mirroring. Repeat the process for any additional channels.

6. Click OK to save changes.

15.3.19 Configuring General System Settings

You can use the General menu to configure miscellaneous system settings.

To configure general settings:

1. From the Main Menu, click

and then click Setting>General>General.

2. Configure the following:

• Device Type: Shows the model number of your system.

• Device No.: Select the remote control address of the system. See 8.1 Setting the

Remote Control Address, page 17.

• Language: Set the system languages. Available options are English, French, and

Spanish.

• Video Standard: Select NTSC (North America) or PAL (Europe).

• HDD Full: Select Overwrite for the system to overwrite the oldest recordings

when the hard drive is full or select Stop Record for the system to stop recording

when the hard drive is full.

• Pack Duration: Select how the duration (in minutes) the system will store video

files. For example, if this is set to 30 minutes, the system will create a new video

file for each 30 minutes of continuous recording.

• Instant Playback: Select the amount of time (in minutes) the system will go back

when instant playback is activated in live view.

• Auto Logout: Select the idle time (in minutes) before the system will logout the

current user.

• Navigation Bar: Check to enable the Navigation Bar that comes up when you left

click in live view.

• Startup Wizard: Check to enable a setup wizard when you start up the system.

• Mouse Speed: Use the slider to adjust the mouse speed.

#LX400060; r.30328/35049; en-US

Lorex LHV16212 User Manual

Questions and Answers: