Using the System
7
By default, the camera(s) included with your system are automatically paired
to the receiver. The camera(s) and receiver will communicate with each other
once they are powered on.
NOTE
It is recommended to power on the camera(s) before powering on the receiver.
7.1 Understanding the On-screen Display
With camera 1 properly connected and powered on, the system displays a
full-screen live view of the camera.
When viewing all channels in Quad mode, the interface appears slightly
different.
#LX400030; r. 2.0/22135/22135; en-US
14
To Next Page
Loading...
Need help?
General
