Settings
10
3. Select the channel you want to activate or de-activate and press to
toggle between ON and OFF.
NOTE
De-activated channels with a connected camera will show the wireless signal strength,
but do not show live video from the camera (see image below).
1. De-activated channel with connected camera
2. No camera connected
4. Press repeatedly until all menus are closed.
10.6 Changing Scan Interval for Auto Sequence Viewing
Set how long each connected camera is displayed on the monitor during Auto
Sequence Viewing.
#LX400030; r. 2.0/22135/22135; en-US
49
To Next Page
Loading...
Need help?
General
