Settings
10
To set scan interval:
1. Press
, then select the System Setting icon. Press to confirm.
2. Select Camera scan interval and press .
3. Choose how long each camera will be displayed on the monitor in Auto
Sequence Viewing mode and press
to confirm.
4. Press repeatedly until all menus are closed.
10.7 Update Firmware
It is important to keep the system up-to-date with the latest firmware. You can
check for and download available firmware upgrades at
www.lorextechnology.com.
To update firmware:
1. Download the latest firmware for the unit from www.lorextechnology.com.
#LX400030; r. 2.0/22135/22135; en-US
50
To Next Page
Loading...
