Recording
8
4. The selected channel appears behind a blue grid. Use the arrow keys to
select a cell in the grid and press
to allow or block them from the
motion detection area. By default, all cells are allowed in the motion detec-
tion area. Blocked cells have an ‘X’ in the center.
Shortcuts:
To block an entire row:
• Press
to block the first cell in the row, then hold the button.
The entire row will be blocked from the motion detection area.
To allow an entire row:
• Press
to allow the first cell in the row, then hold the button.
The entire row will be allowed in the motion detection area.
5. Press
repeatedly until all menus are closed.
8.10 Enabling / Disabling Alarm for Motion Events
With the alarm enabled, the receiver will ‘beep’ when motion is detected by
one of your cameras during scheduled motion recording.
To enable / disable alarm:
1. Press
, then select the Alarm icon.
2. Press to toggle the alarm on and off. The Alarm icon displays ON
or OFF to indicate the current setting.
#LX400030; r. 2.0/22135/22135; en-US
32
To Next Page
Loading...
Need help?
General
