Settings
10
2. Insert the microSD card into the card reader (not included) on your com-
puter. Move the firmware file to the root folder of the microSD card, then
eject the microSD card.
3. Insert the microSD card with the new firmware file into the receiver.
4. Press
, then select the SD Capacity icon. Press to confirm.
5. Follow the on-screen prompts to complete the firmware upgrade.
10.8 Restore Default Settings
Restore all menu settings to their out-of-the-box state. Video recordings and
snapshots on the microSD card are not affected when restoring default
settings.
To restore default settings:
1. Press
, then select the System Setting icon. Press to confirm.
2. Select Restore factory default and press to confirm.
#LX400030; r. 2.0/22135/22135; en-US
51
To Next Page
Loading...
