Pairing Additional Cameras
11
3. Select Pairing and press
.
4. Use the arrow keys on the receiver to select the channel you want to pair
the camera to. Channels that are paired to an existing camera show the
statement PAIR OK, while open channels show NO PAIR. Press
on
the desired channel to begin pairing.
• If you pair a new camera to a channel that is already being used by an
existing camera, the new camera will be connected to that channel.
The old camera will automatically be disconnected.
#LX400030; r. 2.0/22135/22135; en-US
54
To Next Page
Loading...
