Troubleshooting
13
Problem Solution
Bright spot in image
while viewing camera
at night
• This occurs when a camera is pointed at a window to see
outside, because the night vision LED's produce Infrared
light that reflects off the glass. If you need to look outside, in-
stall the camera outdoors. Please note that the camera
must be installed under shelter when placed outdoors.
There is no audio from
the camera(s)
• Make sure the receiver volume is not muted. Turn the re-
ceiver volume up.
• Ensure you are viewing your cameras in Single Channel or
Auto Sequence Viewing mode. There is no audio in Quad
mode.
#LX400030; r. 2.0/22135/22135; en-US
60
To Next Page
Loading...
