EasyManua.ls Logo

Lorex N842A82 - Replacing the Hard Drive; Removing the Hard Drive

Lorex N842A82
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing the Hard Drive22
The system comes with a pre-installed 3.5" SATA hard drive. You can replace the hard drive
with one up to a maximum size of 10TB.
22.1 Removing the Hard Drive
CAUTION
Make sure that the system is OFF and the power adapter is disconnected before removing/installing a hard drive.
To remove the hard drive:
1. Power off the system, and unplug all cabling from the system.
2. Turn the recorder over. Remove the bottom panel screws (6×).
#LX400113; r. 9.0/57192/57197; en-US 100

Table of Contents

Related product manuals