Using the Main Menu17
To access the network load menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the Network tab on the side panel. Click the Net Load
tab on the top panel.
17.5.8 Network Test
Test if your system can connect to other devices over the LAN or Internet. You can enter the IP
address of a device and click Test to determine if your system can connect to it.
To access the network test menu:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION, then click the Network tab on the side panel. Click the Network
Test tab on the top panel.
17.5.9 Saving Your System Configuration to a USB Thumb Drive
The system allows you to save your current system configuration to a USB thumb drive (not in-
cluded). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
#LX400113; r. 9.0/57192/57197; en-US 69
To Next Page
Loading...
Need help?
General