Face Detection15
2. Click EVENTS, then click the Event Settings tab on the side panel. In the drop down click
the Face Detection tab.
3. Select a camera to configure face detection for.
4. Click to enable (
) / disable ( ) face detection on the selected channel.
5. Click to enable Face ROI to enhance images captured through face detection.
6. Click Set next to Schedule to choose which days and times of the week to enable face
detection:
• Click or click-and-drag along the each of the blue timelines to quickly add or remove
time from each day’s schedule in 15–minute segments.
• Click
beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click
. This will allow you to set exact start
and end times for a schedule.
#LX400113; r. 9.0/57192/57197; en-US 50
To Next Page
Loading...
Need help?
General