To Next PageTo Next PageWhat to do if the hard drive is full (0%) and the Lorex Voice Recorder stops recording?
If your Lorex Voice Recorder says the hard drive is full (0%) and isn't recording anymore, it might be because the overwrite function isn't turned on. To fix this, go to the Main Menu, choose DEVICE HDD, select Auto under Overwrite, and then click Apply.
How to troubleshoot power issues with my Lorex Voice Recorder?
If your Lorex Voice Recorder isn't getting power or turning on, check these things: * Make sure all the power cables are properly plugged in, including the power adapter at the back of the unit. * If you have a 16-channel model, ensure the power switch is in the ON (I) position. * Confirm the system is powered on and the LED indicators on the front are lit. * If connected to a power bar or surge protector, try plugging directly into the wall outlet. * Test the outlet by plugging in another device or trying a different outlet.
Why is my Lorex Vantage LH020 Blackbox 2 Voice Recorder remote control not working?
If the system isn't detecting the remote control, the battery in the remote might be dead. Try putting in two new AAA alkaline batteries.
General| Brand | Lorex |
|---|---|
| Model | Vantage LH020 Blackbox 2 |
| Category | Voice Recorder |
| Language | English |
General safety instructions and warnings for product operation and use.
Instructions and guidelines for installing the product safely and correctly.
Lists specific technical features of the DVR, like resolution and compression.
Outlines the network and remote access capabilities of the system.
Instructions on connecting BNC cameras to the DVR's video input ports.
Instructions for connecting a monitor via HDMI or VGA to view the system interface.
Details on connecting the power adapter and turning on the DVR.
Guide to upgrade the DVR's firmware for improved functionality and remote connection.
Importance of setting the correct date and time for accurate video timestamps.
Detailed steps for connecting BNC cameras using extension cables.
Details on how the system records based on motion detection.
Step-by-step instructions for searching and playing back recorded video footage.
Detailed steps for searching video footage using the calendar interface.
Explains the advanced playback controls for navigating and reviewing video.
Instructions for backing up specific video clips to a USB flash drive.
Steps for backing up video files from the DVR to a USB flash drive.
Step-by-step guide to changing the admin and user passwords.
How to create new user accounts and assign specific permissions.
Defining schedules for continuous, motion, or alarm recording.
Adjusting quality, resolution, and frame rate for video recordings.
Steps to search for video footage using dates and times.
Instructions on how to back up video files to a USB flash drive.
Setting up the DVR's network connection using DHCP or Static IP.
Setting up motion detection parameters and areas.
Details on managing user accounts and admin passwords.
Lists the necessary hardware and software requirements for the Lorex Stratus Client.
Instructions for connecting the DVR to the router via an Ethernet cable.
How to find the unique Device ID required for secure internet connection.
Setting up and controlling PTZ (Pan, Tilt, Zoom) cameras.
Instructions for viewing saved video footage on the DVR's hard drive.
Explains the controls for navigating and interacting with video playback.
Configuring settings for PTZ cameras connected to the system.
Creating and managing user accounts with different access levels.
Instructions for connecting to the DVR using the Lorex ECO Stratus app on iOS devices.
Controlling PTZ cameras via the mobile app.
Viewing recorded video remotely on an iPhone or iPad.
How to add, delete, or modify DVR entries in the mobile app.
Instructions for connecting to the DVR using the Lorex ECO Stratus app on Android devices.
Procedures for safely disconnecting and removing the hard drive from the DVR.
Steps for installing a new hard drive into the DVR.
Instructions for formatting the hard drive after installation.
Connecting the DVR to the local network via Ethernet.
Finding the DVR's local IP address for network connectivity.
Overview of setting up DDNS for remote DVR access.
Port forwarding required on the router for remote access.
Steps to create a free Lorex DDNS account.
Enabling the DDNS feature within the DVR's network settings.
Connecting to the DVR using its DDNS address.
