56
Connecting to Your DVR Over the Internet on PC or Mac
Step 3 of 3: Connect to the DVR Over the Internet
Follow the steps below to connect to the DVR over the Internet using a PC or Mac.
NOTE: Make sure to upgrade your DVR to the latest firmware version. Yo
u must have the latest
DVR firmware and client software to connect to the DVR over the Internet.
PC
1 Insert the software CD that comes included with the system. Open the CD and click DVR
Software>Lorex Client Software - PC. Follow the on-screen instructions to install.
• OR, download the Cl
ient Software for PC from www.lorextechnology.com.
2 Once installation is finished, double-click the Lo
rex Stratus Client 1 icon ( ) from the
desktop. The DVR login screen appears.
Select Device ID
Enter Device ID
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
3 Under Login Type, select Device ID.
4 Under Devic
e ID, enter the DVR’s Device ID. Press on the remote control to find the
Device ID.
5 Under Us
er
Name, enter the DVR’s user name (default: admin).
6 Under Pas
sword, enter the DVR’s password (default: 000000).
7 Under Client
Port, enter the DVR’s Client Port (default: 9000).
8 Click Login.
•
If t his is the fi rst time con necti ng to yo ur syst em , you wi ll be p ro mpted to c hange the pa ssw ord.
Ente
r a new 6 character password and click OK.
Enter the new password
and click OK
• Enter the new password in the login screen and click Login to connect to the DVR. The Client
Software connects to your DVR and streams live video from your cameras.
To Next Page
Loading...
