Lorex Vantage LH020 Blackbox 2 - Step 4: Connect the Monitor; Step 5: Connect the Power Adapter and Power on the DVR

6
Step 4: Connect the Monitor
• Connect the included HDMI cable from the HDMI port to the TV or monitor (recommended) OR;
• Connect a VGA cable (not included) from the VGA port t
o the monitor.
HDMI
VGA
8-channel model shown
Step 5: Connect the Power Adapter and Power on the DVR
• Connect the included power adapter to the DC 12V port. Connect the end of the power adapter
to a wall socket or a surge protector.
• 16-channel models only: Turn the power switch to I t
o turn on the DVR.
At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the
system loads a live display view.
8-channel model shown
DC 12V port
16-channel:
Connect power
adapter and turn
on power switch