Lorex Vantage LH020 Blackbox 2 - Using the On-Screen Display

13
Using the On-Screen Display
Using the On-Screen Display
Use the system’s graphical on-screen display to navigate menus and configure options and
settings.
C
M
C
C
1. Date & Time
2. Record Status
3. Channel number /
Channel Title
1 Date & Time: Displays the date and time on the system
2 Record Status:
Displays the current recording status of the system: C=continuous (normal
recording); M=motion recording; A=alarm recording (16-channel models only).
3 Channel n
umber
/ Channel title: Displays channel number or channel title. To rename the
channel number to a title, see “Configuring Custom Channel Names” on page 34.
Tip:
If you can’t see your mouse cursor on screen:
Press 0 on the remote control three times to switch the mouse and system interface
between VGA and BNC monitors.
Press 0 three times to switch the
mouse and system interface
between VGA and BNC monitors