37
Using the Main Menu
4 Click the Setup button next to Mask Area.
The Privacy Area setup screen opens.
Click and drag to move privacy zones
Click Inside the edge and drag to resize
• Click on a privacy area and drag to change
its location.
• Click on the edge of a privacy area and
drag
to resize a privacy area.
• Right-click when you are finished to exit.
5 (Optional) Use the
drop-downs next to
Copy to copy privacy areas to another
channel or all channels. Click the Copy
button to copy privacy areas.
6 Click A
pply to save your settings.
Creating a Custom Split-screen
Display
You can create a custom split-screen
display and re-arrange where channels
are placed.
TIP: You can use the steps below to
create a cus
tom split-screen display on
a secondary monitor connected to the
Video Output port (BNC). First, move
the mouse and system interface to the
Video Out monitor by pressing 0 three
times on the remote control. Complete
the steps, and then press 0 three times
on the remote control again to return
the mouse and system interface to the
VGA or HDMI monitor. Your custom
display will be saved on the secondary
monitor.
To re-arrange the split-screen display:
1 Select the Output ta
b.
2 Under View Setup, select Enable. This lets
you select and arrange the channels you
want to show on the screen.
NOTE: Enabling Vie
w Setup disables your
ability to change channels the
normal way on the selected monitor.
You will need to disable View Setup
to return to normal operation.
Select display mode
Click Vout Setup
3 Under View Mode, select the desired
viewing mode: Single, Quad, Nine, or
Sixteen (sixteen-channel models only).
4 Click Vo
u
t Setup. A menu appears that
allows you to select the arrangement of
channels.
To Next Page
Loading...
