80
Using the PC/Mac Client Software
• Buzzer: Select OFF to enable/disable the system buzzer or select the duration of the system
buzzer after an event occurs.
• Show Message: Sel
ect the checkbox to enable the system to display a warning message when
an event occurs.
• Send Email: Select the checkbox to enable email notifications. Email notification must be
enabl
ed.
• Alarm Out: Enabl
e or disable the alarm out panel (16-channel models only).
• Latch Time: Configur
e the system latch time after an event occurs.
3 Click Sav
e to save changes.
Configuring Auto-Reboot
Auto-reboot allows the system to restart automatically at a set time or date. This improves
system stability.
To configure Auto Maintain:
1 Click the Remote Setting tab, and
click Advance>Maintain.
2 Click the Auto Reboot dr
op-down menu, and select Enable or Disable to activate or
deactivate the auto-reboot feature.
3 Under Reboot, select
how often you want the system to reboot and the time you want the
system to reboot.
4 Click Sav
e to apply your settings.
To Next Page
Loading...
