78
Using the PC/Mac Client Software
To configure firmware auto upgrades:
1 Click the Remote Setting tab, and
click Advanced>Auto Upgrade.
2 Under Auto Upgrade, select Enable to enable automatic firmware updates. Messages for
firmware upgrades will appear on the DVR locally and on the client software.
3 Check Check f
or update to enable local messages on the DVR to notify you for updates. The
system will check for firmware upgrades every hour.
NOTE: Click Detect to check f
or firmware updates manually.
4 Click Sav
e to save changes.
Manually Upgrading System Firmware
To manually upgrade the system firmware, download the latest firmware from the
system’s product page at www.lorextechnology.com.
You must have the latest DVR firmware and client software to connect to the DVR over the
Inte
rnet.
To upgrade the system firmware:
1 Do
wnload and extract the file to your computer’s desktop.
2 Click the Remote Setting tab, and
click Advanced>Firmware upgrade.
To Next Page
Loading...
