Lorex Vantage LH020 Blackbox 2 - Configuring the Recording Schedule (Continuous, Motion, Alarm); Enabling Audio Recording; Configuring Recording Quality, Resolution, and Video Frame Rate

39
Using the Main Menu
Changing the file size changes the
duration of backed up files. For
example, if you select 15 minutes as
your file size, the system stores video
files in 15 minute durations.
Configuring the Recording
Schedule (Continuous, Motion,
Alarm)
To configure the recording schedule:
1 Click the Schedule ta
b.
2 Configure the following:
• Channel: Select the channel y
ou wish to
configure the schedule for.
• Week:
Select the day of the week you wish
to configure.
3 Click inside
the grid t
o configure the
recording schedule:
• The recording schedule is arranged as a
gr
id. Each row represents a recording type
(Continuous and Motion), and each box
represents an hour.
• Recording for each recording type is
enabled dur
ing the selected hour when the
box is filled in with the corresponding
color. Recording for each recording type is
disabled for the selected hour when the
box is gray.
NOTE: 16-Channel models have an
additional row for Alarm recording.
Sensor devices (not included) must
be connected to the system to use
Alarm recording.
4 (Optio
nal): Use the top Copy and Cop
y To
drop-down to copy the recording schedule
to a specific day or all days. Click Copy to
copy the schedule.
5 (Optional): Use the bottom Copy and Copy
To drop-down to copy the recording
schedule to a specific channel or all
channels. Click Copy to copy the schedule.
6 Click Apply
to save your settings.
Enabling Audio Recording
Audio-capable cameras are required
(not included) for audio recording.
To enable audio recording:
1 Click the Ma
inSt
ream tab.
Audio
checkbox
2 Beside the corresponding channel, select
or deselect the checkbox under Audio to
enable or disable audio recording.
3 Click Appl
y
to save your settings.
Configuring Recording Quality,
Resolution, and Video Frame Rate
You can configure the recording quality,
recording resolution and video frame
rate for each channel.
To change the recording quality,
recording r
esolution, and video frame
rate:
1 Click the MainSt
ream tab.
2 Under Mode, sel
ect D1 or 960H. 960H will
enable larger, wide-screen formats, but it
will decrease the number of Frames Per