Lorex Vantage LH020 Blackbox 2 - To Connect Using the Dvrs Local IP Address on a Mac

115
Appendix F: DDNS Setup (Advanced)
• OR, download the Client Software for PC from www.lorextechnology.com.
2 Once installation is finished, double-click the Lo
rex Stratus Client 1 icon ( ) from the
desktop. The DVR login screen appears.
Select IP Login
Enter IP address
Enter User Name (default: admin)
Enter Password (default: 000000)
Enter Client Port (default: 9000)
Click Login
3 Under Login Type, select IP Login.
4 Under IP Addr
ess, enter the DVR’s IP Address (e.g. 192.168.0.100 ).
5 Under User
Name, enter the DVR’s user name (default: admin).
6 Under Pas
sword, enter the DVR’s password (default: 000000).
7 Under Client
Port, enter the DVR’s Client Port (default: 9000).
8 Click Login.
•
If t his is the fi rst time con necti ng to yo ur syst em , you wi ll be p ro mpted to c hange the pa ssw ord.
Ente
r a new 6 character password and click OK.
Enter the new password
and click OK
To connect using the DVR’s local IP address on a Mac:
1 Visit www.lorextechnology.com and download the Client Software for Mac.
2 Extract the installer file and double-click it to install.
3 Open Safa
ri, then click Safari>Quit Safari. This resets Safari to complete the installation.