EasyManua.ls Logo

Lorex Vantage LH020 Blackbox 2 - Configuring DDNS Settings

Lorex Vantage LH020 Blackbox 2
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Using the PC/Mac Client Software
SSL: Select ON/OFF to enable/disable Secure Socket Layer protocol.
SMTP Port: Ent
er your SMTP address.
SMTP Server: E
nter your SMTP Server.
Sender Email: Enter the
sender email address. This can be any address of your choice.
Sender Password: Ent
er your email server’s password.
Receiver Email: Enter the r
ecipient’s email address.
Interval: Ent
er the interval the DVR waits before sending a new email notification.
2 Click Sav
e to save your settings.
Configuring DDNS Settings
Lorex DDNS is available as an optional connectivity option. Please see “Appendix F: DDNS
Setup (Advanced)” on page 113 for details.
The primary connectivity option uses the Lorex Stratus service to connect to your system
over the Internet without requiring port forwarding or DDNS registration. For details, See
“Connecting to Your DVR Over
the Internet on PC or Mac” on page 54.
To configure DDNS settings:
1 Visit http://www.l
orexddns.net and register for a free Lorex DDNS account.
2 Click the Remote Setting t
ab, and click DDNS.
3 Configure the following:
DDNS: Sel
ect Enable or Disable.
• In the Server
drop-down menu, select LOREXDDNS.
Domain Name: Enter y
our Domain name/URL Request from the confirmation email that was
sent after you created your DDNS account.
User name: Ent
er your DDNS User Name that was emailed to you after DDNS registration.
Password: Ent
er your DDNS Device password that was emailed to you after DDNS registration.
4 Click Sav
e to apply your settings.

Table of Contents

Related product manuals