107
Appendix C: Connecting Additional External Monitors
5 Under View Setup, select Enable. This lets you select and arrange the channels you want to
show on the screen.
NOTE: Enabling View
Setup disables your ability to change channels the normal way on the
selected monitor. You will need to disable View Setup to return to normal operation.
Select display mode
Click Vout Setup
6 Under View Mode, select the desired viewing mode: Single, Quad, Nine (8/16-channel
models only), or Sixteen (16-channel models only).
7 Cl
ick Vo
ut Setup. A menu appears that allows you to select the arrangement of channels.
8 Click the drop-down menus to select which channels to show on the screen and the
arrangement of channels.
Select the arrangement of channels on screen
9 Click Apply to save changes. Click Ok. Right-click repeatedly to and return to live viewing.
10 Press 0
on the remote control 3 times to restore the system interface to the VGA/HDMI
monitor.
To Next Page
Loading...
