94
Overlay Data with Navigation and Sonar Data
categories expanded.
To overlay information on your screen:
1. Press
MENU|↓ to OVERLAY DATA|ENT.
2. If you currently have any overlay data on your screen, it will be
listed here. Select
(ENTER TO ADD) and press ENT. The data viewer shows
information categories with "+" or "–" symbols next to each category
name. A category with a "+" next to it is expandable, meaning its con-
tents are hidden.
Selecting the category name and pressing
ENT will show the category's
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents. Just
select the category name and press
ENT.
3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press
ENT to check it (turn on) and
uncheck it (turn off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press
EXIT|EXIT to return to the
page display.
To Next Page
Loading...
Need help?
General