108
Transparency selected on main menu. Transparency slider bar (right).
To adjust Transparency level:
1. Press
MENU|MENU|↓ to TRANSPARENCY|ENT. The TRANSPARENCY slider
bar appears.
2. Use ↑ ↓ to move the bar. Move the bar to the bottom of the scale to
eliminate transparency. Moving the bar to the top of the scale will pro-
vide the greatest level of transparency.
3. Press
EXIT to return to the map display.
Units of Measure
This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters), temperature (degrees Fahren-
heit or Celsius) and heading (true or magnetic) units.
To change Units of Measure:
To set Speed/Distance:
1. Press
MENU|MENU, select System Setup and press ENT. UNITS OF MEAS-
URE
will be highlighted, so press ENT.
2. Speed/Distance will be highlighted. Press
ENT.
3. Use ↑ ↓ to select one of the following options: Statute, Nautical or
Metric. Press
ENT.
4. Press
EXIT repeatedly to return to the sonar display.
To Next Page
Loading...
Need help?
General