87
Map page shown in North Up mode (left) Map page shown in Track Up
mode (right).
To change map orientation:
1. From the Map Page, press
MENU|↓ to MAP ORIENTATION|ENT.
2. Use ↑ ↓ to select the desired mode, then press
ENT.
3. Press
EXIT|EXIT to return to the map page display.
Map Orientation menu with
the North Up map orientation option selected.
NOTE
In North Up and Course Up, the present position arrow appears in
the center of the map page. In Track Up, the position arrow ap-
pears centered in the lower third of the page.
NauticPath™ USA Marine Charts
Your unit can display NauticPath electronic charts on MMCs. They
work just like a MapCreate custom map on a MMC.
In Track Up mode, map shows "N" and arrow to indicate north.
To Next Page
Loading...
