122
3. If you're looking for nearest, the unit says it is calculating, then a list
of waypoints appears. The closest waypoint is highlighted at the top of
the list. The waypoint furthest from you is at the bottom of the list.
4. To see location information on the closest (highlighted) waypoint,
press
ENT and the Waypoint screen appears. (If you wanted to, you
could select another waypoint from the list with the ↑ or ↓ keys.)
A. To navigate to the waypoint, press
ENT. (The Go To Waypoint
command is already highlighted.) The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press ↓ to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with Go To Waypoint selected (left) and
Find on Map selected (right).
To return to the previous page, press EXIT repeatedly.
5. If you're looking by name, there are two options: A. You can spell out
the name in the top selection box. Press ↑ or ↓ to change the first letter,
then press → to move the cursor to the next letter and repeat until the
name is correct, then press
ENT|ENT. B. Or you can jump down to the
lower selection list by pressing
ENT, then press ↓ or ↑ to select a way-
point from the list, then press
ENT. The waypoint screen appears.
To Next Page
Loading...
Need help?
General