55
Navigate trail, navigation page (compass rose) views: driver is
northbound heading straight toward trail point 6 (left); bearing arrow
shows the trail point is due north (straight ahead.) Driver has reached
trail point 6 and must turn west to follow the trail (right). Arrival
alarm goes off and bearing arrow swings around toward the west and
the next waypoint. The unit now shows navigation information to
point 7, which is 2.02 miles away.
Navigate a Back Trail (backtrack)
1. Press
MENU|MENU|↓ to MY TRAILS|ENT.
2. Press ↓|↓ to enter the Saved Trail list, then use ↑ or ↓ to select the
desired Trail Name|
ENT.
3. Press → to
DELETE TRAIL|↓ to NAVIGATE|ENT.
4. Press ↓ to
NAVIGATE|→ to REVERSE|ENT|← to NAVIGATE|ENT. The unit
begins showing navigation information along the trail, in reverse.
NOTE
If you are already located at or near the end of your trail, the arri-
val alarm will go off as soon as you hit
ENT. Press EXIT to clear the
alarm and proceed.
5. Now, begin navigating with your unit.
6. When you reach your destination, be sure to cancel your navigation:
press
MENU|MENU|↓ to CANCEL NAVIGATION|ENT. The unit asks if you're
sure; press ←|
ENT.
Trail
waypoint
symbol
Track or compass heading indicator
Arrival
alarm
Course
line made
from trail
Cross track
error range
(off course
indicator)
Bearing
arrow
To Next Page
Loading...
Need help?
General