ASSEMBLY
OM 0467SB-A [16]
Procedure for Connecting and Disconnecting the Snowblower
PRECAUTIONS TO FOLLOW BEFORE EACH CONNECTION
1. Make sure the area is clear of any object
that could interfere with the connection.
2. Make sure the maintenance of the hitch
and equipment is up to date.
3. Make sure the drive system of the of the
equipment is functional and that there is no
residue, snow or ice that would impede
operation.
4. Figures 7: Make sure the drivelines and
the hitches connection points (items 1A,
1B, 2A, 2B) are clean and not covered with
snow or ice.
5. Figure 7: Make sure the two pins of the
equipment hitch (item 3) and the two round
wire lock pins (item 4) are secure on the
equipment hitch.
6. Figure 7: Make sure the equipment half driveline
(item 5) is secure on the guard’s "U" support
(item 6).
7. Figure 7: Make sure the half driveline (item 7) is
placed on top of the equipment female hitch.
8. Follow the safety measures for operating the
tractor.
9. Make sure the tractor PTO is disengaged.
Figure 7
To Next Page
