STORAGE
OM 0467SB-A [28]
STORAGE
Before storing the snowblower, certain
precautions should be taken to protect it from
deterioration.
1. Clean the subframe and snowblower
thoroughly.
2. Make all the necessary repairs.
3. Replace all safety signs that are damaged,
lost, or otherwise become illegible. If a part to
be replaced has a label on it, obtain a new
safety label from your dealer and install it in
the same place as on the removed part.
4. Repaint all parts from which paint has worn or
peeled.
5. Lubricate the snowblower as instructed under
"Lubrication" section.
6. When the snowblower is dry, oil all moving
parts. Apply oil liberally to all surfaces to
protect against rust.
7. Store in a dry place.
To Next Page
