LS tractor MT5 Series User Manual

4 -11
① Adjustment of Lift rod and Upper link
 Do not adjust the lift rod and upper link over the
described range as below.
 Lift rod (RH)
- Lift up the lift rod handle and turn left or right to
adjust the length.
- Lock the lift rod handle to the lower part after
adjusting.
 Lift rod (LH)
- Remove the upper lift rod pin and turn the
upper part of the lift rod.
 Upper link
- Lift up the lock spring to release the handle and
turn the upper link by using the handle.
- Apply the lock spring after adjusting.
Lift rod (LH)
Lift rod (RH)
Upper link
Lift rod handle
②
①
② Adjustment of stabilizer (optional)
- Check link type
 Pull up the link pin(1) and turn the sleeve (2) of
the check link.
 Insert the link pin(1) into the hole and let it
tightened firmly by locking spring.
▶When adjusting the stabilizer’s length, adjust the implement’s swinging clearance to
be 20~40mm (0.8~1.6 in.) left and right.
Notice
Adjustment
range
Classification Lift rod Upper link
left
495~635 mm
( 19.5 ~ 25.0 in. )
550 ~ 855 mm
( 21.7 ~ 33.7 in.)
right
495~635 mm
( 19.5 ~ 25.0 in.)

LS tractor MT5 Series Specifications

General

Brand	LS tractor
Model	MT5 Series
Category	Tractor
Language	English