2 -5
(3) Seat belt
z Always wear the seat belt before operating the
tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a
“click” indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
z Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Warning
▶If not wearing the seat belt, it may cause serious injury in case of accident.
- During operation, it must be required to wear seat belt with a cab or safety frame
installed.
- After wearing the seat belt, adjust the belt to fit the operator.
▶If safety frame is folded down for frame model, do not wear the seat belt.
Buckle
Seat belt
Buckle
Seat belt
STD
OPT
To Next Page
Loading...
Need help?
General
