2 -4
Weight
adjustment lever
Backrest angle
adjustment lever
Armrest angle adjustment wheel
Backrest extension
adjustment
Lumber support
adjustment lever
② Optional - continued
3) Weight adjustment lever
- PUSH the lever downward for light weight.
- PULL the lever upward for heavy weight after
turning key switch to “ON” position.
4) Backrest angle adjustment lever
- Lift the lever upward to adjust the backrest angle.
- After adjusting, release the lever and check the
backrest locked in place.
5) Armrest angle adjustment wheel
- It is used to lower/lift the armrest.
- Rotate the wheel inside to lower the armrest.
- Rotate the wheel outside to lift the armrest.
6) Backrest extension adjustment
- Pull or push down the backrest to fit your body.
7) Lumber support adjustment lever
- Turn the lever counter-clockwise to raise the
height of the lumber support.
- Turn the lever clockwise to lower the height of
the lumber support.
warning
▶DO NOT put your hand under the seat while sitting. It may cause a injury by seat
suspension.
▶DO NOT adjust the seat position while driving.
To Next Page
Loading...
Need help?
General
