3 -42
(4) Remote control lever and Quick coupler (optional)
These levers are used to operate the hydraulic cylinder and/or motor of the implement attached to
the tractor.
Push the remote control lever forward, and the hydraulic pressure can be delivered to the left-hand
coupler of the related lever and right-hand coupler shall be connected to the drain.
Each lever of the remote control valve can be operated respectively, and when operating the levers
at the same time, the one received less pressure begins to start first.
According to the valve type, the remote control lever has different operation type.
- Spring return type, Detent type and Detent with auto release type.
After connecting and preliminary operating the hydraulic equipment, check again transmission oil
level of the tractor.
Push
Pull
Lever③
Lever②
Lever①
When pulling
When pushing
Lever③
Lever②
Lever①
Warning
▶Before removing hydraulic pipes or hoses and other parts, make sure to check that
hydraulic pressure is relieved completely. The leaks of pressurized oil can cause a
fatal physical injury.
▶Use proper protection equipments, before servicing hydraulic system.
▶Before connecting or disconnecting the hydraulic quick coupler, lower the
implements to the ground, and check that hydraulic pressure is relieved.
To Next Page
Loading...
