3 -44
Down
Up
Auto lift
down switch
▶ When driving on the road, lift up the implement by using the position control lever.
And, lock the down speed control knob.
▶ When lifting up or down the implement by using auto lift control switches, do not
approach the implement. And before using the switches, you have to check the
safety conditions of the working area.
Warning
(6) Auto lift control (MHL, if fitted)
※ It is used to lift the implement up to the highest
position quickly and lower it down to the position
set by position control lever without using
position control lever.
Pull the auto lift-up switch backward to lift up the
implement.
Press the auto lift-down switch to lower down the
implement. At this time, the auto lift-up switch
returns forward automatically.
When auto lift-up switch is pulled back, the
implement shall NOT be moved by position
control lever.
When lifting up the implement, the PTO shaft
shall be stopped in case the PTO mode switch is
placed in “AUTO” position. (optional)
Auto lift
up switch
To Next Page
Loading...
Need help?
General
