4 -15
③ Attaching PTO drive shaft
When connecting PTO drive shaft to the PTO shaft and implement, make sure to check the fixing
status of the locking pins.
When attaching implements with power take-off drive shafts, refer to the drawings as below.
After installing implements,
- check the inclination of the PTO drive shaft,
- check the interference with PTO safety cover and other structure,
- check the effective engaging length of the PTO drive shaft according to the position of the 3-point
linkage.
The stiff inclination of the drive shaft makes a loud noise and may cause a failure of the driveline.
To Next Page
Loading...
Need help?
General
