LS U5020 - PTO Operation Indicator; Parking Brake Indicator; PTO Pressure Indicator

(20) Parking brake indicator
(19) PTO operation indicator
 When the Key switch is ‘ON’ and PTO mode
switch is “Manual” and PTO switch is “ON”, this
indicator will be ON.
 If PTO mode switch is “Auto”, this indicator will
be ON when clutch pedal is NOT depressed and
the implement is NOT lifted up to the upper limit
for PTO operation.
(For further information, See page 3-12)
PTO operation
indicator
 This indicator will be ‘ON’ when applying the
parking brake. (See page 3-10)
Parking brake
indicator
PTO pressure
indicator
(21) PTO pressure indicator
 This indicator will be ON when the hydraulic
pressure of the PTO system is lower then
suitable value. And then, the PTO shaft shall be
stopped automatically to protect the PTO clutch.
3
3 3
3 - 7
stopped automatically to protect the PTO clutch.
(For further information, see page 5-5)