(15) Seat adjustment
Before operating the tractor, adjust the position of driver’s seat according to body size and length.
1) After sitting on driver’s seat, move the seat adjustment lever it up or side to release the lock.
2) Move the driver’s seat forward or backward depending on driver’s body length.
3) Release the seat adjustment lever and check the seat is locked.
Adjust the seat suspension to fit the weight of operator (if fitted).
▶
DO NOT put your hand under the seat while sitting. It may cause a injury by seat
suspension.
Caution
Pull the tilt lever upward to release the steering
column and tilt the steering wheel to desired
position.
And, push the tilt lever downward to lock the
steering column in place, and check to make
sure column does not move forward and
backward.
Adjust column only when stopped.
▶
DO NOT adjust steering column while driving. It may cause a serious accident.
Caution
Fix
Release
Tilt lever
To Next Page
Loading...
