(5) Brake pedals
If separating the left/right pedal and pressing one
side at a time, the brake is applied on the rear
wheel of the pressed pedal.
When stopping, press both brake pedals together.
When working, remove the brake pedal lock pin
and use the left/right pedal independently, the
turning radius shall be reduced.
▶
When driving on the road, engage the left/right brake pedal by the lock pin.
If pressing one side of brake when running, the tractor may turnover.
Brake pedal lock pin
Brake pedal
DO NOT press the one side brake pedal while the differential lock is engaged. It may cause damage
or failure of the axle.
Caution
If pressing one side of brake when running, the tractor may turnover.
▶
While driving, do not ride brake and clutch pedal.
(6) Parking brake lever
If you connect the left/right brake pedal, push the
brake pedal hard and at the same time pull the
parking brake lever up, the parking brake shall be
applied.
When parking or stopping temporarily, use the
parking brake.
(7) Main gear shift lever
Main gear shift lever is available to operate 4 speed ranges. If using range gear shift lever together
with shuttle lever, the transmission of forward 16 speeds and reverse 16 speeds are available.
Parking brake lever
To loosen the parking brake, press the button of
parking brake and pull the lever down. You have to press brake pedals, before releasing the parking
brake.
3
3 3
3 - 10
with shuttle lever, the transmission of forward 16 speeds and reverse 16 speeds are available.
Main gear shift lever 1~4 ranges shall be available for changing the speed while running by applying
the clutch pedal.
▶
Operate main gear shift lever by “H”
pattern. If operated diagonally, it may
cause a failure.
Notice
1
2
3
4
1
2
3
4
Main gear
shift lever
1
11
1
2
22
2
3
33
3
4
44
4
To Next Page
Loading...
