LS U5020 - Adjustment of Lift Rod and Upper Link; Reference of Implement Installation Part

(2) Adjustment of Lift rod and Upper link
 Do not adjust the lift rod and upper link over the
described range as below.
 For lift rod (RH)
- Lift up the lift rod handle and turn left or right to
adjust the length.
- Lock the lift rod handle to the lower part after
adjusting.
 For upper link
- Lift up the lock spring to release the handle and
turn the upper link by using the handle.
- Apply the lock spring after adjusting.
Lift rod (LH)
Lift rod (RH)
Upper link
Lift rod handle
Adjustment range
Classification
Left
Right
Lift rod
510~580 mm (3 steps)
(20.0 ~ 22.8in)
475~580 mm
(18.7 ~ 22.8in)
Upper link
458 ~ 720 mm
(18.0 ~ 28.3in)
(3) Reference of implement installation part
19
(0.74)
A
B
C G H J L N
CAT.1
CAT.2
19.3
(0.75)
25.7
(Max.)
683
(26.8)
825
12
(0.47)
12
39
(1.53)
49
35
(1.53)
45
22.4
(0.88)
28.7
22
(0.86)
28
44.5
(1.75)
52
69
(2.71)
86
76
(2.99)
93
44
(1.73)
51
D
(Min.)
E
(Max.)
F
(Min.)
K
25.4
Lift rod handle
4
4 4
4 - 9
CAT.2
25.7
(1.01)
825
(32.4)
12
(0.47)
49
(1.92)
45
(1.77)
28.7
(1.12)
28
(1.10)
52
(2.04)
86
(3.38)
93
(3.66)
51
(2.00)
Unit : mm
(unit : inch)
25.4
(1.00)