(2) Throttle lever
If you pull the lever backward, it means “high
speed”, and If push it forward, it means “low
speed”.
The throttle lever must be used only for work.
Throttle lever
(3) Throttle pedal
This pedal is used when running on the road.
When using the Throttle pedal, the Throttle lever
must be placed on “low speed”.
(4) Clutch pedal
This is used to engage or disengage the main
transmission clutch for starting engine and shifting
Throttle pedal
3
3 3
3 - 9
▶
DO NOT ride your foot on the clutch pedal while driving the tractor.
▶
As the start safety switch is installed for the operator’s safety, if you don’t press the
pedal completely, it does not start.
Caution
transmission clutch for starting engine and shifting
transmission gear.
Depress the clutch pedal quickly and fully and
release it slowly.
If the PTO mode switch is placed on “Manual”, the
PTO shaft will NOT stop, if the switch is placed on
“AUTO”, the PTO shaft will stop, when pushing
down on clutch pedal.
Clutch pedal
To Next Page
Loading...
