②
②②
② Air-bleeding from fuel injection
pump
1. Place the starting switch “ON”.
2. Loose air bleed bolt, remove the air.
3. If no bubbles in the fuel from the air bleed bolt,
place the starting switch “OFF” and fasten the
air bleed bolt again.
Tight torque : 19.6 ~ 29.4 N.m
(14.54~21.81ft
ㆍ
ㆍㆍ
ㆍ
lbs)
Air bleed bolt
▶
Cover the bleeding fuel with a rag so that it does not flow to other components.
Notice
5
5 5
5 - 23
To Next Page
Loading...
