LSIS XBC-DR14E - 11.5 Positioning Example

Chapter 11 TR Output Option Board
11 - 15
11.5 Positioning Example
This chapter describes positioning example of XBO-TN04A.
(1) Positioning setup
Option board positioning is set up by U area. Set up each parameter to use positioning function.
(a) Input each parameter value.
(b) Turn On or Off according whether to use positioning
X-axis bias speed
Speed limit
X acc. time
X dec. time
X JOG high speed
X JOG low speed
Y-axis bias speed
Speed limit
Y acc. time
Y dec. time
Y JOG high speed
Y JOG low speed
X positioning enable bit
Y positioning enable bit
www.behaotomasyon.com
www.behaotomasyon.com