LSIS XBF-AD08A - 2.1 Setting Sequence before operation

Chapter 2 Analog Input Module (XBF-AD04A)
2 - 1
Chapter 2 Analog Input Module
2.1 Setting Sequence before operation
Before using the analog input module, follow steps below.
XBF-AD04A
Checking performance specification
Wiring
Reading analog input data
Setting parameter
Programming
Setting external voltage/current switch
Specification (2.2 performance specification)
 Operating environment
 Input type and range
 Digital output range
Wiring
 Wiring power (External DC24V)
 Wiring analog input
Setting switch
 Setting voltage/current input type
Analog input test
 XG5000 special module monitor test mode
Parameter
 XG5000 I/O parameter
Programming
 Programming for reading analog data
(U device)
Refer to trouble shooting when there is error
or analog data is abnormal.