Parameters modification; Power
supply data and connectors
description modification;
Adding lidar IP setting description;
modifying Ethernet configuration of
UCWP
Specifications modification
MSOP packet transmission interval
modification
UCWP length, motor speed
description modification
Modification of detection range,
Table 2.2, Figure 3.1 and Azimuth.
1.5 Light spot added
Modification of Additional
information, lidar internal timing,
8.3 End Time of Data Point
Note of lidar IP range setting
added; Table 2.1 Electrical
Parameter modified
Detection Range updated; wire
definition of Adapter Cable
updated; 6.3 gPTP Synchronization
added