Lucent Technologies 8510T User Manual

Viewing Unanswered Incoming Calls in the Call Log
(When Call Log is set to All Calls)
Use the following procedures when the Call Log is set for "All Calls."
To view the 10 most recent unanswered calls (when the Call Log is
set to "All Calls")
1 Press
cbbbbbbc
bbbbbb
Menu .
2 Press the softkey below CallLog.
NOTE: If the Call Log is locked, you will need to enter your 3-digit
password before you can use the Call Log. (See the information in
"Locking and Unlocking the Directory, Call Log, and All Softkeys"
later in this section.)
d The display shows:
(New) CALL LOG
Incoming Outgoing Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
NOTE: The word "New" means that there are new unanswered
calls since the last time you checked the Call Log for unanswered
incoming calls.
3 Press the softkey below Incoming.
d The display shows:
(New) INCOMING
Unanswered Answered Done
c
c
c
bbbbbbbbbbbbbbbbbbbbbbbb
c
c
cbbbbbbbbbbbbbbbbbbbbbbbb
46

Lucent Technologies 8510T Specifications

General

Brand	Lucent Technologies
Model	8510T
Category	Touch terminals
Language	English